Thermographic System FIRE-SCAN for Early Fire Detection

Early fire detection system FIRE-SCAN enables capturing of critical temperature indoor and on open-air grounds at an early stage. An automatic calibration with threshold values results in prompt alerting up to automated fire fighting. However, should a fire break out, FIRE-SCAN provides an additional option for monitoring the area surrounded by fire even in case of smoke or formation of dust. Thus, fire fighting can be supported very effectively.

Thermographic automation software TTC

High Thermal and Spatial Resolutions of Integrated Infrared Camera Assure Success

The application of high-performance of infrared camera systems for early fire protection systems allows a detection of smallest pocket of embers due to their high spatial resolution, meaning a sufficient number of pixels. In case of an insufficient number of pixels for the to-be-monitored area, it is possible to integrate further infrared cameras into the system FIRE-SCAN without any problems. The system’s sphere of action can be additionally expanded at a constant spatial resolution by mounting the infrared camera onto a remote-controlled Pan-tilt head. Besides the infrared camera’s spatial resolution, which meets highest requirements, the infrared camera system also features an optimised thermal resolution. Only this combination makes it possible to detect smallest temperature changes or hidden pockets of embers at an early stage. As may be necessary, this information will be displayed in control room or directly integrated into the available control system.

Systems with ATEX Certification

FIRE-SCAN is applied, for example, in the chemical industry. The development of explosive gas-air mixtures represents a central hazard there. Therefore, system components that have a certification in accordance with the ATEX Directive are used for such applications. These are primarily protective housings for thermal imaging and visual cameras, pan/tilt systems and electrical distribution systems. They are suitable for deployment in potentially explosive areas 1 and 2.

ATEX, explosion protection
Monitoring in Plant Operation - Picture credits: Bildnachweis: © iStock / ewg3D

WASTE‐SCAN 4.0

Thermographic Measurement and Monitoring in Plant Operation

In the age of Industry 4.0, the demands on system suppliers are growing, not just with regard to the primary measurement and monitoring tasks, but also with regard to data networking and structure. To meet these demands, InfraTec has developed a platform‐independent internal data structure, which represents both the measurement and alarm data as well as the measurement sequences. Interfaces to control systems of leading suppliers, e.g. via TCP/IP in the PROFINET, Modbus, CC‐Link and many other versions, can be achieved flexibly and economically. The proprietary Gigabit Ethernet data interfaces of fast infrared thermography camera heads permit real‐time data analysis and evaluation.

 

Get in contact with InfraTec thermography division

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.

Spain

InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Str. 61 – 63
01217 DresdenGERMANY

Thermography Systems for Early Fire Protection

Thermography Systems for Early Fire Protection from InfraTec

Play

Use of FIRE-SCAN for these Industries & Applications

  • thermal imaging for security tasks
    Security Applications

    Security Applications

    Observation tasks for applications like investigation, remote surveillance, border guard and the protection of critical infrastructure are great challenges for the related authorities. Powerful infrared cameras are getting more and more indispensable nowadays.

  • thermal imaging in chemical industry
    Chemical Industry

    Chemical Industry

    Systematically control reactive process heat and display with infrared camera systems of InfraTec.

  • thermal imaging for thermal optimisation
    Thermal Optimisation

    Thermal Optimisation

    Identify possible problems already in the development phase well before serial production.

InfraTec service
Comprehensive Service from InfraTec

Comprehensive Service

Our Company’s own service department accompanies you even with complex automation solutions far beyond the actual sale. In the event of malfunctions, your enquiry is forwarded directly to the employees via a hotline. By remote maintenance, you will receive an initial diagnosis. Together with you, we analyse the cause of the problem and quickly find a solution.

InfraTec Service - Technical Support
Advice from Specialists

Advice from Specialists

For more than 25 years, InfraTec has been implementing thermographic solutions with partners worldwide. Based on this wealth of experience, a thorough analysis of the initial situation is one of the first steps in cooperation. We prepare feasibility analyses and advise you on the planning of your future thermographic system. Afterwards, you will receive an offer adapted to your specific requirements.

Thermography trainings
Training of your Employees

Training of your Employees

In our training centre in Dresden, you can attend practical thermography training courses. After the transfer of the turnkey system, upon request qualified employees of our service team will introduce you step by step to your automation solution and instruct future users on your premises.

Camera protective housing for infrared cameras by InfraTec
Wide Range of Protective Housings

Wide Range of Protective Housings

The InfraTec product range includes numerous protective housings. The all-weather and robust metal housings allow the use of the thermographic cameras in harsh environments and protect against mechanical stress, dust and splash water. Depending on requirements, users can also choose ATEX-certified protective housings that can be used in potentially explosive atmospheres.

InfraTec camera equipment
Ask for your suitable accessories

Suitable Accessories for Extended Requirements

InfraTec offers high-quality accessories for all camera series. This allows users to flexibly adapt their camera to changing test and measurement environments and optimize it for daily indoor and outdoor use. The corresponding components are specially designed for the corresponding model and open up new possibilities – for current applications and new tasks.

Infrared Cameras for FIRE-SCAN

  • Infrared camera VarioCAM® HD Z of InfraTec
    VarioCAM® HD Z

    VarioCAM® HD Z

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (1,024 × 768) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator
    New
  • infrared camera VarioCAM HD head of InfraTec
    VarioCAM® HD head 900

    VarioCAM® HD head 900

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (2,048 × 1,536) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator
  • Stationary thermographic camera PIR uc LWIR for industrial use
    PIR uc LWIR 600

    PIR uc LWIR 600

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (640 × 512) IR pixels

    Detector
    Uncooled microbolometer focal-plane array
    Field of View Calculator
    New
  • Infrared camera VarioCAM® HDx head seurity from InfraTec
    VarioCAM® HDx head 600

    VarioCAM® HDx head 600

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (640 × 480) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator
  • Stationary thermographic camera PIR uc LWIR for industrial use
    PIR uc LWIR 300

    PIR uc LWIR 300

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (320 × 256) IR pixels

    Detector
    Uncooled microbolometer focal-plane array
    Field of View Calculator
    New
  • infrared camera VarioCAM HD head of InfraTec
    VarioCAM® HD head 800

    VarioCAM® HD head 800

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (1,024 × 768) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator
  • infrared camera VarioCAM HD head of InfraTec
    VarioCAM® HD head 700

    VarioCAM® HD head 700

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (1,280 × 960) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator
  • infrared camera VarioCAM HD head of InfraTec
    VarioCAM® HD head 600

    VarioCAM® HD head 600

    Category

    Industrial thermal cameras

    Image format (IR pixels)

    (640 × 480) IR pixels

    Detector
    Uncooled Microbolometer Focal Plane Array
    Field of View Calculator

Fairs and Trade Shows